Industrial Coding & Marking
Our equipment helps seed and pet food producers meet label compliance, batch control and traceability requirements. We keep codes on seed packaging bags, pet staple food, pet treats, cans and other packaging clear, rub-resistant and consistently readable, helping your products keep pace with high-speed lines and stay compliant.
Start from packaging
01 / Materials
Choose your coding technology based on your packaging material. For seed packaging bags and pet food staple or treat pouches, TTO gives high-speed inline coding with flexible production date, batch and variety data. For cans and other metal packaging, fiber laser gives permanent wear-resistant marks on the can body. For cartons and paper bags, CO2 laser is fast and consumable-free. For labels, TTO gives stable scannable QR codes.
Check the overview below for the full compatibility table, and click each packaging material for material examples.
| Material | TTO | UV Laser | Fiber Laser | CO2 Laser |
|---|---|---|---|---|
| Paper and laminated labels | First choice|Mainstream label printing | Suitable|Great on laminated labels | Use with caution|Works on dark labels | Use with caution|Laminated labels may blister |
| Cans and other metal packaging | Use with caution|Only on labels, not directly on the can body | Suitable|Light-colored marks on can bodies with average contrast | First choice|Permanent wear-resistant marks on metal can bodies | Not suitable|Metal is highly reflective at 10.6μm |
| Paper bags and cartons | Use with caution|Only on applied labels | Use with caution|Weaker contrast | Not suitable|No image on paper | First choice|Fast and consumable-free |
| Seed packaging bags (stand-up pouches, sachets) | First choice|Inline high-speed coding of production date, batch and variety information | Suitable|Cold processing does not burn film; weaker contrast on white film | Not suitable|Easily punctures | Preferred 10.2 μm; 10.6 μm as fallback |
| Pet treat packaging (pouches, sticks) | First choice|High-speed inline coding | Suitable|Cold processing does not burn film | Not suitable|Easily punctures | Use with caution|High film risk |
| Pet food staple packaging (large bags, stand-up pouches) | First choice|Inline coding on bag surfaces with flexible variable data | Suitable|Cold processing does not burn film | Not suitable|Easily punctures | Preferred 10.2 μm; 10.6 μm as fallback |
02 / Equipment
Choose your coding technology based on your packaging line equipment. Flow wrappers, VFFS, premade pouch machines, labellers, pagination packers, multi-lane packers, fillers, horizontal packers and can seaming machines can all integrate TTO, UV laser, fiber laser and CO2 laser coding. The key for agriculture and pet food lines is to avoid quality risks such as product safety (film punctures, seal failure, leakage, moisture ingress, surface scorching) and traceability compliance (unreadable codes, missing codes) while balancing production speed and operating cost.
Check the overview below for the full compatibility table, and click each packaging line equipment type for equipment examples.
| Equipment | TTO | UV Laser | Fiber Laser | CO2 Laser | Remarks |
|---|---|---|---|---|---|
| Premade pouch machine | First choice|Flat premade pouch surfaces for transfer printing | Suitable|Can mark foil; laminate film turns gray | Not suitable|Thin foil punctures the barrier | Not suitable|Burn-through | Premade pouches are often foil or laminate; Fiber easily punches through. |
| Labeller | First choice|Mainstream label printing with scannable QR codes | Suitable|Works on PET/synthetic paper; weaker on paper | Not recommended|Damages facestock and adhesive | Not recommended|Burn-through risk | Labellers code the label; Fiber burns laminated film on contact. |
| Pagination packer | Suitable|Needs coated paper and single-sheet positioning | Suitable|Works but weaker contrast | Not suitable|No image on paper | First choice|Mature and fast paper marking | Keep Fiber away from thin laminated paper. |
| Filler | Not suitable|Ribbons cannot adhere to rigid curved can bodies | First choice|Cleanest on light-colored rigid plastic bottles | Suitable|Good on dark plastics; white plastics yellow | Suitable|Good frosted marks on glass; plastic bottles scorch edges | TTO only codes labels; bare metal cans favor Fiber. |
| Can seaming machine | Not suitable|Ribbons cannot adhere to curved can bodies | Suitable|Light-colored marks on can bodies | First choice|Permanent wear-resistant marks on metal can bodies | Not suitable|Metal is highly reflective; no image | For cans, Fiber marks the body permanently or UV marks light-colored codes; prefer TTO on labels for high-density codes. |
| Flow wrapper | First choice|Continuous web feeding; inline transfer before sealing is most stable | Suitable|Can mark film; needs stable transport | Not suitable|Easily punctures film | Not suitable|Burns through film | Seal integrity is the red line; Fiber concentrates heat and easily creates micro pinholes. |
| VFFS | First choice|Standard inline station for VFFS film | Suitable|Marking position is limited after bag forming | Not suitable|Powder and granule bags puncture and leak easily | Not suitable|High film risk | Powder leaks slowly through invisible micro holes; CO2 heat input is hard to control at high speed. |
| Multi-lane packer | First choice|Synchronized transfer across lanes | Suitable|Hard to synchronize across high-speed lanes | Not suitable|Thin soft film punctures easily | Not suitable|Multi-lane film scorches easily | Multi-lane machines run fast with very thin film in narrow lanes; heat damage from Fiber and CO₂ is amplified. |
| Horizontal packer | First choice|Inline transfer on horizontal pouch film | Suitable|Can mark film; control web transport | Not suitable|Thin laminate film punctures easily | Not suitable|Film scorches easily | Similar to flow wrappers with continuously stretched film and strict sealing. |
03 / Line Speed
First, confirm whether the line runs continuously or pauses in each packaging cycle, and identify what you are coding: seed packaging bags, pet food staple or treat pouches, cans, labels or cartons. Then narrow down TTO models: D06S supports both continuous and intermittent modes, making it the most versatile. For continuous production without stops, prefer D06S in continuous mode. For lines that pause between cycles, compare D118i at up to 120 prints/min, D158i at up to 300 prints/min and D06S at up to 350 prints/min. Laser coding is not excluded by continuous or intermittent operation. Match the machine to the line: D118i suits medium- and low-speed seed packaging bag and label lines up to 120 prints/min with no air supply needed; D158i suits high-speed intermittent lines such as high-speed labellers up to 300 prints/min; D06S suits high-cadence continuous or intermittent flexible packaging lines and supports 32 mm and 53 mm printheads. Laser figures of 8,000 mm/s and 12,000 mm/s are galvanometer scan speeds, not line speeds, so confirm with stable line speed, code size, content volume and real packaging samples.
Agriculture and pet food lines also require verification of variety information readability on seed packaging, mark abrasion resistance on can bodies, and code readability in dusty and humid environments.
| Dimension | TTO: D118i | TTO: D158i | TTO: D06S (32 / 53) | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|---|---|
| Speed parameters | Up to 120 prints/min; 16 m/min | Up to 300 prints/min; 6–48 m/min | Up to 350 prints/min; continuous 0–48 m/min; intermittent 6–40 m/min | Scan speed: U5005 8,000 mm/s; U6005/U6010 8,000 mm/s, U6010 12,000 mm/s; DLU500X below 8,000 mm/s; DLU520 8,000 mm/s. Character speed: U6005/U6010 up to 1,200 chars/s; U5005 and DLU520 up to 700 chars/s | DLC300 scan speed 8,000 mm/s; DLC600 scan speed 12,000 mm/s | DLF200e/300e and DLFM scan speed 8,000 mm/s |
| Speed positioning | Medium- and low-speed seed packaging bag, label and packaging film lines | High-speed intermittent lines such as high-speed labellers | High-cadence continuous or intermittent flexible packaging lines for pet food staple and treat pouches | Medium- to high-speed small-format marking for rigid packaging and can bodies | High-speed small-format marking on cartons and paper bags | Piece-by-piece or intermittent coding on metal packaging such as cans |
| High-speed verification | Code length, print range, packaging machine trigger signal, and cadence margin after content length changes | Single-print downtime, print length, ribbon specification and packaging machine cadence | Continuous or intermittent mode, actual print area, stable line speed, and synchronization stability on emergency stop and restart |
04 / Printing Content
When selecting by coding content, first rule out unsuitable options. Calculate the maximum outline of the content and exclude TTO models accordingly: D118i prints 24/32 mm×15 mm and D158i prints 32 mm×15 mm, so any content exceeding those ranges eliminates that model; D06S prints 32/53 mm×75 mm in intermittent mode or 32/53 mm×150 mm in continuous mode, the largest coverage among TTO printers. If content exceeds 53 mm×150 mm, exclude single-head TTO and select a laser by field lens range. Then define precision and color requirements: for fine, high-density QR codes, avoid 200 dpi D118i as first choice and prefer 300 dpi D158i or D06S or the matching laser, confirming with minimum module size and verification grade samples. For specified color text, do not assume lasers produce the target color by default; confirm colored TTO ribbons for color number and adhesion, or validate laser color on real materials.
Second, match technology by content type. Variable data such as production date, batch, serial number, traceability codes, counters and plain text can be compared across all technologies, with material, speed and cost deciding. For high-density small codes, fine characters and low-heat content, prefer UV laser.
In general, plain variable text has the widest application, but no technology covers everything. QR codes, multi-language text and long text must meet size, resolution and readability together. Permanent and anti-counterfeiting marks must pass field tests on real materials. Content fit is only an initial filter and must be combined with other factors.
| Content | TTO: D118i / D158i / D06S | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|
| Production date, expiry date and batch codes | All comparable; D118i is 200 dpi; D158i and D06S are 300 dpi | All comparable; confirm variable editing and line interface | DLC300 and DLC600 comparable; confirm variable editing and interface | DLF200e/300e and DLFM comparable; confirm variable editing and interface |
| Fine marking | Prefer D158i and D06S; confirm whether D118i's 200 dpi meets reading needs | Prefer UV laser |
| Code length in the marking direction, character count, material absorption, field lens and working distance, fume extraction and trigger synchronization |
| Per-code marking time, material response, glass stress, fume extraction and position stability at high speed |
| Material reflection and absorption, QR or character area, fixture positioning, encoder triggering and temperature rise in continuous operation |
| Sample by spot size and material performance |
| Barcodes, QR codes | Prefer D158i and D06S; D06S explicitly supports barcodes and QR codes | Prefer the U6 Series; sample other models by code size and scanning performance | Sample by QR size and material performance | Sample by QR size, spot size and scanning performance |
| Specified color text | Color ribbons can be evaluated; confirm color number, ribbon width and adhesion | Cannot produce a specified color by default | Cannot produce a specified color by default | Cannot produce a specified color by default |
| Large-area graphics, long text | Exclude single-head TTO when content exceeds D06S's 53×150 mm and cannot be split | Choose by field lens range | Choose by field lens range | Choose by field lens range |