Industrial Coding & Marking
Our equipment helps producers of bakery, grain and oil, snacks, seasonings, convenience food, health products, frozen food, fresh produce, beverages and more meet label compliance, batch control and traceability requirements. We keep codes on food and beverage packaging clear, rub-resistant and consistently readable, helping your products keep pace with high-speed lines and stay compliant.
Start from packaging
01 / Materials
Distinguish whether the package material is flexible packaging or rigid packaging. For rigid packaging such as rigid cartons, rigid plastic boxes, bottles and cans, TTO is not suitable; a laser coder is recommended. For PET materials, the 9.3 μm CO2 laser wavelength is recommended for its high absorption and excellent coding results. For metal materials, a fiber laser is recommended. UV laser works on most packaging materials.
See the sections below for detailed technology comparisons, and click each packaging material to view examples.
| Material \ Technology | TTO | UV Laser | Fiber Laser | CO2 Laser |
|---|---|---|---|---|
| Cartons and boxes | Only on applied labels | Fine marks | Blurry, may scorch and smoke | 10.6 μm preferred: clear marks, low cost |
| Paper and laminated labels | Versatile, easy to change codes | Great on laminated labels, no blistering | Works on dark labels, not light-colored or laminated | Laminated labels may wrinkle and blister |
| Tubs, bottles and other rigid plastic packaging | Only suitable on applied labels | Good on transparent and light-colored bottles | Works on dark plastic, not light-colored | 9.3 μm suits PET bottles; 10.6 μm may melt the surface |
| Cans and other metal packaging | Cannot mark metal surfaces directly | Works but lower contrast | Preferred: wear-resistant marks | No marks on metal surfaces |
| Bags, Pouches, Film and other flexible packaging | Mature, uses ribbon consumables | Cold processing, does not burn film | Easily punches through bags | Preferred 10.2 μm; 10.6 μm as fallback |
02 / Equipment
Flow wrappers, VFFS machines, premade pouch machines, labellers, pagination machines, multi-lane packers, fillers, horizontal packers and other equipment can all be hardware-integrated with TTO, UV laser, fiber laser and CO2 laser coding technologies. The core of the scheme selection lies in quality risks such as product safety (film perforation, seal failure, material leakage, appearance burns), traceability compliance (insufficient readability of scanning codes, missing coding), while also taking into account requirements such as production speed and operating costs.
See the sections below for detailed technology comparisons, and click each packaging line equipment to view examples.
| Equipment | TTO | UV Laser | Fiber Laser | CO2 Laser | Notes |
|---|---|---|---|---|---|
| Premade pouch machine | Commonly used | Preferred | Not for foil laminated or thin soft pouches | Usable on thick paper / thick plastic bags | Many premade pouches are foil laminated or composite soft bags; Fiber can easily punch through and break the seal. |
| Labeller | Very commonly used | Preferred for laminated labels | Only for dark, non-laminated labels | Usable on non-laminated paper labels; laminated labels may blister | Labellers code the label, not the product; Fiber burns through lamination. |
| Pagination packer | Commonly used | Universal | Dark thick paper / dark cards only | Preferred for paper | Pagination machines mostly handle paper sheets, cartons and labels; avoid Fiber on thin laminated paper. |
| Filler | Only on labels, not directly on bare bottles | Directly on transparent / light-colored bottles | Directly on dark plastic bottles | 9.3 μm suits PET bottles; 10.6 μm may pit the surface | Filling lines handle the bottles themselves; TTO cannot code the bottle body and only works on labels; Fiber suits bare metal cans. |
| Flow wrapper | Commonly used | Preferred (soft film) | Not for soft film — easily punches through and leaks | Only for paper / thick laminated film; caution on thin soft film | Flow wrappers mostly run stretched flat soft film; seal integrity is critical. Fiber concentrates heat and can create micro pinholes in film, causing seal leaks. |
| VFFS | Commonly used (intermittent models) | Preferred for continuous high-speed models | Caution with powder / granule bags — easy to punch through and leak | Usable on intermittent low-speed PE bags; risky on film | VFFS powder bags can slowly leak powder through invisible micro holes; on continuous high-speed VFFS the heat input of CO₂ is hard to control. |
| Multi-lane packer | Commonly used on low-speed multi-lane lines | Preferred for high-speed multi-lane lines | Not recommended for thin soft film multi-lane lines | Paper multi-lane lines OK; film multi-lane lines may burn the film | Multi-lane machines run fast with very thin film in narrow lanes; heat damage from Fiber and CO₂ is amplified. |
| Horizontal packer | Commonly used | Preferred for soft film | Not for thin composite soft film | Usable on paper packaging | Similar to flow wrappers: continuously stretched soft film with high seal requirements. |
03 / Line Speed
Step one: confirm whether the line runs continuously or pauses in each packaging cycle. Once the feed mode is confirmed, narrow down TTO: within TTO, D06S is the most versatile because it supports both continuous and intermittent modes. For continuous production where the product does not stop during printing, compare the continuous-mode D06S first; if the packaging cycle has pauses, filter by maximum print frequency between D118i (120 prints/min), D158i (300 prints/min) and D06S (350 prints/min). Laser coding does not use continuous or intermittent as an exclusion criterion.
Step two: then match the best model to the line. D118i suits medium- and low-speed flexible packaging lines up to 120 prints/min and needs no air supply; D158i suits high-speed intermittent lines up to 300 prints/min, such as high-speed tissue machines and labellers; D06S suits high-cadence continuous or intermittent flexible packaging lines with 32 mm and 53 mm printheads. The 8,000 mm/s and 12,000 mm/s laser figures are galvanometer scan speeds, not line speeds; final confirmation must combine stable line speed, code size, content volume and sampling on real packaging.
| Dimension | TTO: D118i | TTO: D158i | TTO: D06S (32 / 53) | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|---|---|
| Speed parameters | Up to 120 prints/min; 16 m/min | Up to 300 prints/min; 6–48 m/min | Up to 350 prints/min; continuous 0–48 m/min; intermittent 6–40 m/min | Scan speed: U5005 8,000 mm/s; U6005/U6010 8,000 mm/s, U6010 12,000 mm/s; DLU500X below 8,000 mm/s; DLU520 8,000 mm/s. Character speed: U6005/U6010 up to 1,200 chars/s; U5005 and DLU520 up to 700 chars/s | DLC300 scan speed 8,000 mm/s; DLC600 scan speed 12,000 mm/s | DLF200e/300e and DLFM scan speed 8,000 mm/s |
| Speed positioning | Medium- and low-speed flexible packaging lines | High-speed intermittent lines | High-cadence continuous or intermittent flexible packaging lines | Medium- to high-speed lines | High-speed small-format marking on suitable materials; line speed depends on per-code marking time | More for piece-by-piece, intermittent, or sample-verified continuous coding |
| High-speed verification | Code length, print range, packaging machine trigger signal, and cadence margin after content length changes | Single-print downtime, print length, ribbon specification and packaging machine cadence | Continuous or intermittent mode, actual print area, stable line speed, and synchronization stability on emergency stop and restart |
04 / Printing Content
Step one: start by calculating the maximum outline of the content and exclude TTO models accordingly: D118i prints 24/32 mm×15 mm and D158i prints 32 mm×15 mm — if the content exceeds those ranges, that model cannot remain a candidate; D06S prints 32/53 mm×75 mm (intermittent) or 32/53 mm×150 mm (continuous), the largest coverage among TTO models. If content exceeds D06S's 53 mm×150 mm, single-head TTO should be ruled out and a laser selected by field lens range.
Step two: Then confirm precision and color requirements: for very fine, high-density QR codes, the 200 dpi D118i is not the first choice — compare the 300 dpi D158i and D06S or corresponding laser solutions, and confirm via sampling at the minimum module size and scan grade; for specified color text, do not assume a standard laser can produce the target color — confirm whether a color TTO ribbon meets the color number and adhesion requirements, or verify the laser's color effect on real material.
Step three: match the best technology by content type. For variable data such as three core codes, all technologies can be compared and the choice is finally decided by material, speed and cost. For detailed markings (very small QR codes, tiny characters), compare UV laser first.
| Content | TTO: D118i / D158i / D06S | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|
| Production date, expiry date and batch codes | All comparable; D118i is 200 dpi; D158i and D06S are 300 dpi | All comparable; confirm variable editing and line interface | DLC300 and DLC600 comparable; confirm variable editing and interface | DLF200e/300e and DLFM comparable; confirm variable editing and interface |
| Fine marking | Prefer D158i and D06S; confirm whether D118i's 200 dpi meets reading needs | Prefer UV laser |
| Code length in the marking direction, character count, material absorption, field lens and working distance, fume extraction and trigger synchronization |
| Per-code marking time, material response, glass stress, fume extraction and position stability at high speed |
| Material reflection and absorption, QR or character area, fixture positioning, encoder triggering and temperature rise in continuous operation |
| Sample by spot size and material performance |
| Barcodes, QR codes | Prefer D158i and D06S; D06S explicitly supports barcodes and QR codes | Prefer U6005/U6010; sample other models by code size and scanning performance | Sample by QR size and material performance | Sample by QR size, spot size and scanning performance |
| Specified color text | Color ribbons can be evaluated; confirm color number, ribbon width and adhesion | Cannot produce a specified color by default | Cannot produce a specified color by default | Cannot produce a specified color by default |
| Large-area graphics, long text | Exclude single-head TTO when content exceeds D06S's 53×150 mm and cannot be split | Choose by field lens range | Choose by field lens range | Choose by field lens range |