Industrial Coding & Marking
Our equipment helps manufacturers of auto parts, hardware, cables, plumbing and other industrial products meet durable marking and traceability requirements. We keep codes clear, permanent and readable on metal, plastic and other industrial substrates, supporting reliable identification and traceability on the production line.
Start from packaging
01 / Materials
Distinguish whether the package material is flexible packaging or rigid packaging. For rigid packaging such as rigid cartons, rigid plastic boxes, bottles and cans, TTO is not suitable; a laser coder is recommended. Metal parts favor fiber laser for wear-resistant permanent marks; plastics favor UV laser for fine marking without thermal deformation; cartons favor CO2 laser for fast consumable-free marking; labels favor TTO for stable scannable high-density QR codes.
Check the overview below for the full compatibility table, and click each material for material examples.
| Material | TTO | UV Laser | Fiber Laser | CO2 Laser |
|---|---|---|---|---|
| Metal | Not suitable|Curved parts cannot contact the transfer ribbon | Suitable|Fine shallow marking with average contrast | First choice|High metal absorption with wear-resistant permanent marks | Not suitable|Metal is highly reflective at 10.6μm |
| Plastic | Use with caution|Works on flat surfaces; curved parts are hard to position | First choice|Fine marking on engineering plastics without thermal deformation | Suitable|Good on dark plastics; white plastics yellow | Use with caution|Works on some materials but scorches edges |
| Multi-layer material | Suitable|Works when a printable top layer exists | Suitable|Works on transparent top layers | Use with caution|Works on dark top layers | Use with caution|Works on paper, coated or organic top layers |
| Cartons and boxes | Use with caution|Only on applied labels | Use with caution|Fine marks but weaker contrast | Not suitable|Blurry and may scorch with smoke | First choice|Fast and consumable-free on paper |
| Paper and laminated labels | First choice|Mainstream label printing with scannable high-density QR codes | Suitable|Great on laminated labels | Use with caution|Works on dark labels, not light-colored or laminated | Use with caution|Laminated labels may wrinkle and blister |
| Cable jackets and other wire materials | Use with caution|Works on flat jackets; round surfaces are hard to ribbon | Suitable|Fine marking on jacket surfaces | First choice|Durable wear-resistant marks on dark jackets | Use with caution|Works on some materials |
02 / Equipment
Flow wrappers, VFFS, premade pouch machines, labellers, pagination packers, multi-lane packers, fillers, horizontal packers, conveyor lines and marking workstations can all integrate TTO, UV laser, fiber laser and CO2 laser coding. The key for industrial applications is to avoid quality risks such as product performance (worn or detached marks, insufficient durability, surface scorching) and traceability compliance (unreadable codes, missing codes) while balancing production cadence and operating cost.
Check the overview below for the full compatibility table, and click each equipment type for equipment examples.
| Equipment | TTO | UV Laser | Fiber Laser | CO2 Laser | Remarks |
|---|---|---|---|---|---|
| Premade pouch machine | First choice|Flat premade pouch surfaces for transfer printing | Suitable|Can mark foil; laminate film turns gray | Not suitable|Thin foil punctures the barrier | Not suitable|Burn-through | Premade pouches are often foil or laminate; Fiber easily punches through. |
| Labeller | First choice|Mainstream label printing with scannable QR codes | Suitable|Works on PET/synthetic paper; weaker on paper | Not recommended|Damages facestock and adhesive | Not recommended|Burn-through risk | Labellers code the label; Fiber burns laminated film on contact. |
| Pagination packer | Suitable|Needs coated paper and single-sheet positioning | Suitable|Works but weaker contrast | Not suitable|No image on paper | First choice|Mature and fast paper marking | Keep Fiber away from thin laminated paper. |
| Filler | Not suitable|Ribbons cannot adhere to rigid curved bottles | First choice|Cleanest on light-colored rigid plastic bottles | Suitable|Good on dark plastics; white plastics yellow | Suitable|Good frosted marks on glass; plastic bottles scorch edges | TTO only codes labels; bare metal cans favor Fiber. |
| Conveyor line | Use with caution|Works on flat surfaces; curved parts are hard to position | First choice|Clean inline marking on light plastics and glass | Suitable|Wear-resistant inline marking on metal parts | Use with caution|Works on paper and wood; plastics scorch edges | Conveyor lines mostly mark work-in-progress directly; focus on positioning and trigger synchronization. |
| Flow wrapper | First choice|Continuous web feeding; inline transfer before sealing is most stable | Suitable|Can mark film; needs stable transport to prevent vibration | Not suitable|Easily punctures film | Not suitable|Burns through film | Seal integrity is the red line; Fiber concentrates heat and easily creates micro pinholes. |
| VFFS | First choice|Standard inline station for VFFS film | Suitable|Marking position is limited after bag forming | Not suitable|Powder and granule bags puncture and leak easily | Not suitable|High film risk | Powder leaks slowly through invisible micro holes; CO2 heat input is hard to control at high speed. |
| Multi-lane packer | First choice|Synchronized transfer across lanes | Suitable|Hard to synchronize across high-speed lanes | Not suitable|Thin soft film punctures easily | Not suitable|Multi-lane film scorches easily | Multi-lane machines run fast with very thin film in narrow lanes; heat damage from Fiber and CO₂ is amplified. |
| Horizontal packer | First choice|Inline transfer on horizontal pouch film | Suitable|Can mark film; control web transport | Not suitable|Thin laminate film punctures easily | Not suitable|Film scorches easily | Similar to flow wrappers with continuously stretched film and strict sealing. |
| Marking workstation | Suitable|Flat workpieces can be transfer-printed | First choice|Fine marking with clear contrast on light-colored parts | First choice|Permanent wear-resistant marks on metal parts | Use with caution|Works on paper and wood | Workstations suit piece-by-piece sampling and small batches; focus on fixture positioning. |
03 / Line Speed
Step one, confirm whether the line runs continuously or pauses in each packaging cycle, and identify what you are coding: metal parts, plastic parts, cable jackets, labels or cartons. Then narrow down TTO models: D06S supports both continuous and intermittent modes, making it the most versatile. For continuous production without stops, prefer D06S in continuous mode. For lines that pause between cycles, compare D118i at up to 120 prints/min, D158i at up to 300 prints/min and D06S at up to 350 prints/min. Laser coding is not excluded by continuous or intermittent operation.
Step two, match the machine to the line: D118i suits medium- and low-speed label and packaging film lines up to 120 prints/min with no air supply needed; D158i suits high-speed intermittent lines such as high-speed pagination packers and labellers up to 300 prints/min; D06S suits high-cadence continuous or intermittent flexible packaging lines and supports 32 mm and 53 mm printheads. Laser figures of 8,000 mm/s and 12,000 mm/s are galvanometer scan speeds, not line speeds, so confirm with stable line speed, code size, content volume and real workpiece samples.
Step three, industrial lines also require verification of mark abrasion resistance on metal parts, code readability in oily and dusty environments, and temperature rise and position stability during continuous operation.
| Dimension | TTO: D118i | TTO: D158i | TTO: D06S (32 / 53) | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|---|---|
| Speed parameters | Up to 120 prints/min; 16 m/min | Up to 300 prints/min; 6–48 m/min | Up to 350 prints/min; continuous 0–48 m/min; intermittent 6–40 m/min | Scan speed: U5005 8,000 mm/s; U6005/U6010 8,000 mm/s, U6010 12,000 mm/s; DLU500X below 8,000 mm/s; DLU520 8,000 mm/s. Character speed: U6005/U6010 up to 1,200 chars/s; U5005 and DLU520 up to 700 chars/s | DLC300 scan speed 8,000 mm/s; DLC600 scan speed 12,000 mm/s | DLF200e/300e and DLFM scan speed 8,000 mm/s |
| Speed positioning | Medium- and low-speed label and packaging film lines | High-speed intermittent lines such as high-speed pagination packers and labellers | High-cadence continuous or intermittent flexible packaging lines | Medium- to high-speed small-format marking for electronic components, hardware and engineering plastics | High-speed small-format marking on cartons, wood and similar materials | Piece-by-piece, intermittent or sample-verified continuous coding on metal parts |
| High-speed verification | Code length, print range, packaging machine trigger signal, and cadence margin after content length changes | Single-print downtime, print length, ribbon specification and packaging machine cadence | Continuous or intermittent mode, actual print area, stable line speed, and synchronization stability on emergency stop and restart |
04 / Printing Content
Step one, calculate the maximum outline of the content and exclude TTO models accordingly: D118i prints 24/32 mm×15 mm and D158i prints 32 mm×15 mm, so any content exceeding those ranges eliminates that model; D06S prints 32/53 mm×75 mm in intermittent mode or 32/53 mm×150 mm in continuous mode, the largest coverage among TTO printers. If content exceeds 53 mm×150 mm, exclude single-head TTO and select a laser by field lens range.
Step two, then define precision and color requirements: for fine, high-density QR codes, avoid 200 dpi D118i as first choice and prefer 300 dpi D158i or D06S or the matching laser, confirming with minimum module size and verification grade samples. For specified color text, do not assume lasers produce the target color by default; confirm colored TTO ribbons for color number and adhesion, or validate laser color on real materials.
Step three, match technology by content type. Variable data such as production date, batch, serial number, counters and plain text can be compared across all technologies, with material, speed and cost deciding. For high-density small codes, fine characters and low-heat content, prefer UV laser.
| Content | TTO: D118i / D158i / D06S | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|
| Production date, expiry date and batch codes | All comparable; D118i is 200 dpi; D158i and D06S are 300 dpi | All comparable; confirm variable editing and line interface | DLC300 and DLC600 comparable; confirm variable editing and interface | DLF200e/300e and DLFM comparable; confirm variable editing and interface |
| Fine marking | Prefer D158i and D06S; confirm whether D118i's 200 dpi meets reading needs | Prefer UV laser |
| Code length in the marking direction, character count, material absorption, field lens and working distance, fume extraction and trigger synchronization |
| Per-code marking time, material response, glass stress, fume extraction and position stability at high speed |
| Material reflection and absorption, QR or character area, fixture positioning, encoder triggering and temperature rise in continuous operation |
| Sample by spot size and material performance |
| Barcodes, QR codes | Prefer D158i and D06S; D06S explicitly supports barcodes and QR codes | Prefer the U6 Series; sample other models by code size and scanning performance | Sample by QR size and material performance | Sample by QR size, spot size and scanning performance |
| Specified color text | Color ribbons can be evaluated; confirm color number, ribbon width and adhesion | Cannot produce a specified color by default | Cannot produce a specified color by default | Cannot produce a specified color by default |
| Large-area graphics, long text | Exclude single-head TTO when content exceeds D06S's 53×150 mm and cannot be split | Choose by field lens range | Choose by field lens range | Choose by field lens range |