Industrial Coding & Marking
Our equipment helps pharmaceutical and medical device manufacturers meet UDI marking, traceability and regulatory compliance requirements. We keep product marks clear, durable and reliably readable, supporting your products through market access.
Start from packaging
01 / Materials
Distinguish whether the package material is flexible packaging or rigid packaging. For rigid packaging such as rigid cartons, rigid plastic boxes, bottles and cans, TTO is not suitable; a laser coder is recommended. Primary packaging contacts drugs or devices directly, so prioritize sterile barrier integrity and mark durability: CO2 laser is the first choice for glass, fiber laser for aluminum foil, UV laser for rigid plastics, and TTO for flexible films and webs. For secondary packaging labels and cartons, TTO or laser coding both work; CO2 laser is recommended for paper cartons. For tertiary corrugated boxes, CO2 laser offers fast, consumable-free marking.
Check the overview below for the full compatibility table, and click Primary Packaging, Secondary Packaging or Tertiary Packaging for material examples.
02 / Equipment
Flow wrappers, VFFS, premade pouch machines, labellers, pagination packers, multi-lane packers, fillers, horizontal packers, blister machines and thermoforming sterile sealing machines can all integrate TTO, UV laser, fiber laser and CO2 laser coding. The selection of solutions for pharmaceutical and medical device production lines hinges on quality risks such as product safety (sterile barrier breakthrough, seal failure, content contamination, surface scorching) and traceability compliance (unreadable UDI and serialization codes, missing coding), while also taking into account production speed, operational costs, and regulatory traceability requirements.
Check the overview below for the full compatibility table, and click each packaging line equipment type for equipment examples.
03 / Line Speed
Step one, confirm whether the line runs continuously or pauses in each packaging cycle, and identify what you are coding: packaging film, labels, bottle surfaces or lidding material. Then narrow down TTO models: D06S supports both continuous and intermittent modes, making it the most versatile. For continuous production without stops, prefer D06S in continuous mode. For lines that pause between cycles, compare D118i at up to 120 prints/min, D158i at up to 300 prints/min and D06S at up to 350 prints/min. Laser coding is not excluded by continuous or intermittent operation.
Step two, match the machine to the line: D118i suits medium- and low-speed blister lidding film and labelling lines up to 120 prints/min with no air supply needed; D158i suits high-speed intermittent lines such as high-speed labellers up to 300 prints/min; D06S suits high-cadence continuous or intermittent flexible packaging lines and supports 32 mm and 53 mm printheads. Laser figures of 8,000 mm/s and 12,000 mm/s are galvanometer scan speeds, not line speeds, so confirm with stable line speed, code size, content volume and real packaging samples.
Step three, pharmaceutical and medical device lines also require verification of sterile barrier integrity after coding, UDI readability before and after sterilization, and position stability at high speed.
04 / Printing Content
Step one, calculate the maximum outline of the content and exclude TTO models accordingly: D118i prints 24/32 mm×15 mm and D158i prints 32 mm×15 mm, so any content exceeding those ranges eliminates that model; D06S prints 32/53 mm×75 mm in intermittent mode or 32/53 mm×150 mm in continuous mode, the largest coverage among TTO printers. If content exceeds 53 mm×150 mm, exclude single-head TTO and select a laser by field lens range.
Step two, then define precision and color requirements: for UDI codes and high-density QR codes, avoid 200 dpi D118i as first choice and prefer 300 dpi D158i or D06S or the matching laser, confirming with minimum module size and verification grade samples. For specified color text, do not assume lasers produce the target color by default; confirm colored TTO ribbons for color number and adhesion, or validate laser color on real materials.
Step three, match technology by content type. Variable data such as three core codes can be compared across all technologies, with material, speed and cost deciding. For detailed markings (very small QR codes, tiny characters), prefer UV laser.
| Material Category | TTO Thermal Transfer | UV Laser | Fiber Laser | CO2 Laser |
|---|---|---|---|---|
| Glass | Not suitable|Rigid curved surfaces cannot make full contact with the transfer ribbon | Suitable|Cold marking with clear contrast; control energy to prevent micro-cracks in glass | Use with caution|Thermal stress may chip edges; not recommended for injection vials | First choice|Frosted white surface marking with stable contrast; mainstream in pharma |
| Labels | First choice|Mainstream label printing; resin ribbons give stable scannable high-density QR codes | Suitable|Works on PET/synthetic labels; weaker contrast on paper labels | Use with caution|Easily damages facestock and adhesive; labels deform | Use with caution|Works on paper/synthetic paper but with burn-through risk |
| Corrugated cartons | Suitable|Flat coated paper can be transferred; cost is high for large formats | Use with caution|Weaker contrast due to paper absorption; PE-laminated surfaces turn gray | Not suitable|No image on either paper or film surfaces | First choice|Fast and consumable-free on cardboard; laminated moisture-proof surfaces need sampling |
| Rigid plastics | Not suitable|Formed rigid parts cannot run through roll-film transfer | First choice|Cold processing with clear contrast on white/light plastics and no thermal deformation | Suitable|Good on dark plastics; white PP/HDPE tends to yellow and scorch | Use with caution|Easy edge scorching, odor and particles; only some PET works |
| Printed cartons | Suitable|Requires coated paper; bare card has poor adhesion and rubs off easily | Suitable|Works but paper absorption weakens contrast | Use with caution|Scorched yellowing edges; high-density codes are unclear | Suitable|Mature and fast on paper; contrast is weaker for high-density traceability codes |
| Aluminum foil / cold-formed aluminum | Use with caution|Only coated laminates accept ink; bare aluminum does not | Suitable|Can mark light-colored codes; thin foil requires controlled energy density | First choice|High metal absorption and speed; limit power on 0.02mm thin foil to prevent burn-through | Not suitable|Aluminum is highly reflective at 10.6μm; almost no image |
| Sterile breathable barriers | First choice|Mature ribbon pairing for Tyvek/medical paper; must resist EO sterilization without smearing | Suitable|Can mark gray codes; control energy to prevent micro-holes that break sterility | Not suitable|Fiber burn-through directly destroys sterile barrier integrity | Use with caution|Same burn-through risk; only for non-sterile outer layers |
| Flexible film / laminate pouches | First choice|Top choice for high-speed inline film; strong adhesion on PE/PP surfaces and flexible variable data | Suitable|Limited by film flatness and web vibration; contrast is weaker on white film | Not suitable|Easily punctures film and damages the barrier layer | Not suitable|High burn-through risk on thin transparent film |
| Packaging Equipment (Industry Attribute) | TTO Thermal Transfer | UV Laser | Fiber Laser | CO2 Laser | Remarks |
|---|---|---|---|---|---|
| 3. Premade pouch machine | First choice|Flat pouch surface for transfer printing | Suitable|Can mark foil pouch surfaces; laminate film turns gray | Not suitable|Thin aluminum foil punctures easily, breaking the barrier | Not suitable|Burn-through | Premade pouches are often foil or laminate pouches; Fiber easily punches through the wall and breaks sealing, and pharma moisture protection raises the bar. |
| 4. Labeller | First choice|Mainstream label printing with scannable high-density QR codes | Suitable|Works on PET/synthetic paper; weaker on paper | Not recommended|Damages facestock and adhesive | Not recommended|Burn-through risk | Labellers code the label, not the product body; Fiber burns laminated film. Focus on high-density UDI code readability. |
| 5. Pagination packer | Suitable|Needs coated paper and single-sheet positioning | Suitable|Works but weaker contrast | Not suitable|No image on paper | First choice|Mature and fast paper marking | Pagination packers handle sheets, cartons and labels; keep Fiber away from thin laminated paper. CO2 is the most stable on carton surfaces. |
| 7. Filler | Not suitable|Ribbons cannot adhere to rigid curved bottle surfaces | First choice|Cleanest on light-colored rigid plastic bottles | Suitable|Good on dark plastics; white plastics yellow | Suitable|Good frosted marks on glass; plastic bottles scorch edges easily | Fillers handle bottles and cans; TTO cannot mark the bottle surface directly and only codes labels. CO2 frosts glass and UV is cleanest on plastic. |
| 1. Flow wrapper | First choice|Continuous web feeding; inline transfer before sealing is most stable | Suitable|Can mark film; needs stable web transport to prevent vibration | Not suitable|Easily punctures film | Not suitable|Burns through film and damages the barrier | Flow wrappers run stretched flat film; seal integrity is the red line. Fiber concentrates heat and easily creates micro pinholes that leak. |
| 2. Vertical form-fill-seal machine | First choice|Standard inline station for vertical form-fill-seal film | Suitable|Marking position is limited after bag forming | Not suitable|Easily punctures | Not suitable|Burn-through | VFFS powder and granule bags leak slowly through invisible micro holes; CO2 heat input is hard to control at continuous high speed. |
| 6. Multi-lane packer | First choice|Synchronized transfer across multiple lanes | Suitable|Hard to synchronize across high-speed lanes | Not suitable|Easily punctures | Not suitable|Burn-through | Multi-lane machines run fast with thin film and narrow lanes; Fiber and CO2 amplify heat damage. Prefer synchronized multi-lane TTO. |
| 8. Horizontal packer | First choice|Inline transfer on horizontal pouch film | Suitable|Can mark film; control web transport | Not suitable|Easily punctures | Not suitable|Burn-through | Similar to flow wrappers with continuously stretched film and strict sealing; avoid Fiber and 10.6μm CO2 on film. |
| 9. Blister packaging machine | First choice|Mainstream inline transfer on PTP lidding film | Suitable|Can mark formed blister trays with limited positioning | Suitable|Can mark aluminum lidding foil; limit power to prevent burn-through | Not suitable|Aluminum foil is highly reflective; no image | PTP lidding film favors TTO; laser on foil needs controlled power to prevent burn-through, and UV marking on formed trays needs stable positioning. |
| 10. TFFS thermoforming sterile sealing machine | First choice|Mainstream for Tyvek/medical paper lidding | Suitable|Low energy only to prevent micro-holes | Not suitable|Fiber burn-through destroys sterile barrier | Not suitable|Burn-through risk | TTO is mainstream on Tyvek/medical paper lidding; any laser must avoid micro holes and fiber burn-through or the sterile barrier fails. |
| CO2 Laser: DLC300 / DLC600 |
|---|
| Fiber Laser: DLF200e/300e / DLFM |
|---|
| Speed parameters | Up to 120 prints/min; 16 m/min | Up to 300 prints/min; 6–48 m/min | Up to 350 prints/min; continuous 0–48 m/min; intermittent 6–40 m/min | Scan speed: U5005 8,000 mm/s; U6005/U6010 8,000 mm/s, U6010 12,000 mm/s; DLU500X below 8,000 mm/s; DLU520 8,000 mm/s. Character speed: U6005/U6010 up to 1,200 chars/s; U5005 and DLU520 up to 700 chars/s | DLC300 scan speed 8,000 mm/s; DLC600 scan speed 12,000 mm/s | DLF200e/300e and DLFM scan speed 8,000 mm/s |
| Speed positioning | Medium- and low-speed blister lidding film, labelling and intermittent lines | High-speed intermittent lines such as high-speed labellers and pagination packers | High-cadence continuous or intermittent flexible packaging and Tyvek lidding lines | Medium- to high-speed small-format marking; confirm line speed by per-code marking time | High-speed small-format marking on cartons, glass and suitable materials | More for piece-by-piece, intermittent, or sample-verified continuous coding |
| High-speed verification | Code length, print range, packaging machine trigger signal, and cadence margin after content length changes | Single-print downtime, print length, ribbon specification and packaging machine cadence | Continuous or intermittent mode, actual print area, stable line speed, and synchronization stability on emergency stop and restart | Code length in the marking direction, character count, material absorption, field lens and working distance, fume extraction and trigger synchronization | Per-code marking time, material response, glass stress, fume extraction and position stability at high speed | Material reflection and absorption, QR or character area, fixture positioning, encoder triggering and temperature rise in continuous operation |
| CO2 Laser: DLC300 / DLC600 |
|---|
| Fiber Laser: DLF200e/300e / DLFM |
|---|
| Production date, expiry date and batch codes | All comparable; D118i is 200 dpi; D158i and D06S are 300 dpi | All comparable; confirm variable editing and line interface | DLC300 and DLC600 are comparable; confirm variable editing and interface | DLF200e/300e and DLFM are comparable; confirm variable editing and interface |
| Fine marking | Prefer D158i and D06S; confirm whether D118i at 200 dpi meets readability | Prefer UV laser | Sample by spot size and material effect | Sample by spot size and material effect |
| Specified color text | Evaluate colored ribbons; confirm color number, width and adhesion | Specified colors cannot be achieved by default | Specified colors cannot be achieved by default | Specified colors cannot be achieved by default |
| UDI barcodes and QR codes | Prefer D158i and D06S; D06S explicitly supports barcodes and QR codes | Prefer U6005/U6010; sample other models by code size and readability | Sample by QR code size and material effect | Sample by QR code size, spot size and readability |
| Large-format graphics and long text | Exclude single-head TTO when content exceeds 53×150 mm and cannot be split | Select by field lens range | Select by field lens range | Select by field lens range |