Industrial Coding & Marking
We keep codes on cosmetics, personal care products, paper products and other consumer product packaging clear, durable and consistently readable. Adaptable to a wide range of packaging materials, our equipment helps your products comply with regulatory standards and become more competitive.
Start from packaging
01 / Materials
Distinguish whether the package material is flexible packaging or rigid packaging. For rigid packaging such as rigid plastic boxes, bottles and cans, TTO is not suitable; a laser coder is recommended. For PET materials, the 9.3μm CO2 laser wavelength offers high absorption and excellent coding results. For metal cans and aluminum tubes, a fiber laser is recommended. UV laser works on most packaging materials.
Check the overview below for the full compatibility table, and click each packaging material for material examples.
| Material | TTO | UV Laser | Fiber Laser | CO2 Laser |
|---|---|---|---|---|
| Cartons and boxes | Use with caution|Only on applied labels | Use with caution|Fine marks but weaker contrast | Not suitable|Blurry and may scorch with smoke | First choice|Fast, consumable-free and crisp on paper at low cost |
| Paper and laminated labels | First choice|Mainstream label printing with stable scannable high-density QR codes | Suitable|Great on laminated labels with no blistering | Use with caution|Works on dark labels, not light-colored or laminated | Use with caution|Laminated labels may wrinkle and blister |
| Tubs, bottles and other rigid plastic packaging | Use with caution|Only suitable on applied labels, not directly on the bottle | First choice|Clear contrast on transparent and light-colored bottles with no thermal deformation | Suitable|Good on dark plastics; white plastics yellow | Use with caution|9.3μm suits PET bottles; 10.6μm may melt the surface |
| Bags, film and other flexible packaging | First choice|High-speed inline transfer on film with strong PE/PP adhesion and flexible variable data | Suitable|Cold processing does not burn film; contrast is weaker on white film | Not suitable|Easily punctures film | Preferred 10.2 μm; 10.6 μm as fallback |
| Metal cans, aluminum tubes and other metal packaging | Use with caution|Only coated surfaces accept ink; bare aluminum does not | Use with caution|Can mark light-colored codes with average contrast | First choice|High metal absorption with wear-resistant marks | Not suitable|Metal is highly reflective at 10.6μm and shows no image |
02 / Equipment
Flow wrappers, VFFS, premade pouch machines, labellers, pagination packers, multi-lane packers, fillers and horizontal packers can all integrate TTO, UV laser, fiber laser and CO2 laser coding. The core of the selection lies in avoiding quality risks such as product safety (seal failure, leakage, surface scorching, film perforation) and traceability compliance (unreadable codes, missing coding), while also taking into account production speed and operating costs.
Check the overview below for the full compatibility table, and click each packaging line equipment type for equipment examples.
| Equipment | TTO | UV Laser | Fiber Laser | CO2 Laser | Remarks |
|---|---|---|---|---|---|
| Premade pouch machine | First choice|Flat premade pouch surfaces for transfer printing | Suitable|Can mark foil surfaces; laminate film turns gray | Not suitable|Thin foil punctures easily, breaking the barrier | Not suitable|Burn-through | Premade pouches are often foil or laminate; Fiber easily punches through the wall and breaks sealing. |
| Labeller | First choice|Mainstream label printing with scannable high-density QR codes | Suitable|Works on PET/synthetic paper; weaker on paper | Not recommended|Damages facestock and adhesive | Not recommended|Burn-through risk | Labellers code the label, not the product body; Fiber burns laminated film on contact. |
| Pagination packer | Suitable|Needs coated paper and single-sheet positioning | Suitable|Works but weaker contrast | Not suitable|No image on paper | First choice|Mature and fast paper marking | Pagination packers handle sheets, cartons and labels; keep Fiber away from thin laminated paper. |
| Filler | Not suitable|Ribbons cannot adhere to rigid curved bottle surfaces | First choice|Cleanest direct marking on transparent and light-colored bottles | Suitable|Can mark dark plastic bottles directly | Suitable|Good frosted marks on glass; plastic bottles scorch edges | Fillers handle bottles; TTO cannot mark the bottle body and only codes labels. Bare metal cans favor Fiber. |
| Flow wrapper | First choice|Continuous web feeding; inline transfer before sealing is most stable | Suitable|Can mark film; needs stable transport to prevent vibration | Not suitable|Easily punctures film | Not suitable|Burns through film and damages the barrier | Flow wrappers run stretched flat film; seal integrity is the red line. Fiber concentrates heat and easily creates micro pinholes. |
| VFFS | First choice|Standard inline station for VFFS film | Suitable|Marking position is limited after bag forming | Not suitable|Powder and granule bags puncture and leak easily | Not suitable|Only some intermittent low-speed PE bags; high film risk | VFFS powder bags leak slowly through invisible micro holes; CO2 heat input is hard to control at continuous high speed. |
| Multi-lane packer | First choice|Synchronized transfer across lanes | Suitable|Hard to synchronize across high-speed lanes | Not suitable|Thin soft film punctures easily | Not suitable|Multi-lane film scorches easily | Multi-lane machines run fast with thin film and narrow lanes; Fiber and CO2 amplify heat damage. |
| Horizontal packer | First choice|Inline transfer on horizontal pouch film | Suitable|Can mark film; control web transport | Not suitable|Thin laminate film punctures easily | Not suitable|Works on paper but scorches film | Similar to flow wrappers with continuously stretched film and strict sealing. |
03 / Line Speed
Step one, confirm whether the line runs continuously or pauses in each packaging cycle, and identify what you are coding: packaging film, labels, bottle surfaces or cartons. Then narrow down TTO models: D06S supports both continuous and intermittent modes, making it the most versatile. For continuous production without stops, prefer D06S in continuous mode. For lines that pause between cycles, compare D118i at up to 120 prints/min, D158i at up to 300 prints/min and D06S at up to 350 prints/min. Laser coding is not excluded by continuous or intermittent operation.
Step two, match the machine to the line: D118i suits medium- and low-speed flexible packaging and labelling lines up to 120 prints/min with no air supply needed; D158i suits high-speed intermittent lines such as high-speed tissue machines and labellers up to 300 prints/min; D06S suits high-cadence continuous or intermittent flexible packaging lines and supports 32 mm and 53 mm printheads. Laser figures of 8,000 mm/s and 12,000 mm/s are galvanometer scan speeds, not line speeds, so confirm with stable line speed, code size, content volume and real packaging samples.
Step three, consumer goods and personal care lines also require verification of rub resistance on cosmetic and personal care bottles and labels, cadence stability on high-speed tissue lines, and blister-free coding on laminated labels.
| Dimension | TTO: D118i | TTO: D158i | TTO: D06S (32 / 53) | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|---|---|
| Speed parameters | Up to 120 prints/min; 16 m/min | Up to 300 prints/min; 6–48 m/min | Up to 350 prints/min; continuous 0–48 m/min; intermittent 6–40 m/min | Scan speed: U5005 8,000 mm/s; U6005/U6010 8,000 mm/s, U6010 12,000 mm/s; DLU500X below 8,000 mm/s; DLU520 8,000 mm/s. Character speed: U6005/U6010 up to 1,200 chars/s; U5005 and DLU520 up to 700 chars/s | DLC300 scan speed 8,000 mm/s; DLC600 scan speed 12,000 mm/s | DLF200e/300e and DLFM scan speed 8,000 mm/s |
| Speed positioning | Medium- and low-speed flexible packaging and labelling lines | High-speed intermittent lines such as high-speed tissue machines and labellers | High-cadence continuous or intermittent flexible packaging lines | Medium- to high-speed small-format marking for cosmetics and personal care bottles and labels | High-speed small-format marking on cartons and paperboard | Piece-by-piece or intermittent coding on metal parts and dark light-absorbing plastics |
| High-speed verification | Code length, print range, packaging machine trigger signal, and cadence margin after content length changes | Single-print downtime, print length, ribbon specification and packaging machine cadence | Continuous or intermittent mode, actual print area, stable line speed, and synchronization stability on emergency stop and restart |
04 / Printing Content
Step one, calculate the maximum outline of the content and exclude TTO models accordingly: D118i prints 24/32 mm×15 mm and D158i prints 32 mm×15 mm, so any content exceeding those ranges eliminates that model; D06S prints 32/53 mm×75 mm in intermittent mode or 32/53 mm×150 mm in continuous mode, the largest coverage among TTO printers. If content exceeds 53 mm×150 mm, exclude single-head TTO and select a laser by field lens range.
Step two, then define precision and color requirements: for fine, high-density QR codes, avoid 200 dpi D118i as first choice and prefer 300 dpi D158i or D06S or the matching laser, confirming with minimum module size and verification grade samples. For specified color text, do not assume lasers produce the target color by default; confirm colored TTO ribbons for color number and adhesion, or validate laser color on real materials.
Step three, match technology by content type. Variable data such as production date, batch, serial number, counters and plain text can be compared across all technologies, with material, speed and cost deciding. For high-density small codes, fine characters and low-heat content, prefer UV laser.
| Content | TTO: D118i / D158i / D06S | UV Laser: U5005 / U6005/U6010 / DLU500X / DLU520 | CO₂ Laser: DLC300 / DLC600 | Fiber Laser: DLF200e/300e / DLFM |
|---|---|---|---|---|
| Production date, expiry date and batch codes | All comparable; D118i is 200 dpi; D158i and D06S are 300 dpi | All comparable; confirm variable editing and line interface | DLC300 and DLC600 comparable; confirm variable editing and interface | DLF200e/300e and DLFM comparable; confirm variable editing and interface |
| Fine marking | Prefer D158i and D06S; confirm whether D118i's 200 dpi meets reading needs | Prefer UV laser |
| Code length in the marking direction, character count, material absorption, field lens and working distance, fume extraction and trigger synchronization |
| Per-code marking time, material response, glass stress, fume extraction and position stability at high speed |
| Material reflection and absorption, QR or character area, fixture positioning, encoder triggering and temperature rise in continuous operation |
| Sample by spot size and material performance |
| Barcodes, QR codes | Prefer D158i and D06S; D06S explicitly supports barcodes and QR codes | Prefer the U6 Series; sample other models by code size and scanning performance | Sample by QR size and material performance | Sample by QR size, spot size and scanning performance |
| Specified color text | Color ribbons can be evaluated; confirm color number, ribbon width and adhesion | Cannot produce a specified color by default | Cannot produce a specified color by default | Cannot produce a specified color by default |
| Large-area graphics, long text | Exclude single-head TTO when content exceeds D06S's 53×150 mm and cannot be split | Choose by field lens range | Choose by field lens range | Choose by field lens range |