Industrial Coding & Marking
DIKAI customer case studies: the challenge, the solution and the outcome.
Background The customer's xx workshop produces fruit gummies on multiple multi-lane packers fitted with TIJ high-resolution inkjet coders. Because the workshop frequently hosts visitor tours, the line needed replanning, cost reduction and higher efficiency. Pain points Inkjet consumables were costly and cartridges were hard to change in tight spaces; marks rubbed off easily and could not reliably hold the factory's internal codes, weakening anti-counterfeiting; the old supplier's after-sales response was slow. Customer needs and solution highlights The line produces six lanes simultaneously and needs six codes at fixed positions on the film — clear, rub-resistant and supporting anti-counterfeiting and anti-diversion; missed codes must trigger an alarm; the equipment needs collision protection without blocking packer maintenance. DIKAI coding solution: DLU500F air-cooled UV lasers were selected for the multi-lane line — permanent, rub-proof marks for anti-counterfeiting and anti-diversion; the air-cooled design needs no chiller, uses no consumables and has a compact body. Two DLU500F units were deployed per line with independent control. The lasers link to the packer PLC and alarm signals, so missed codes trigger automatic alarms. The operation screen sits inside the protective cover to meet collision-safety requirements. A custom compact shared frame was ceiling-mounted to save space and ease maintenance. Project highlights The air-cooled DLU500F uses zero consumables, cutting long-term operating costs with permanent marks; removing the water tank avoids floor space, heat and appearance problems, fitting the lighthouse-style workshop tour scenario; the customer values DIKAI's full-cycle service, with fast response to failures on day and night shifts.
Background The customer's color-bean workshop packers were fitted with xxx GP2408T film rolls and used ribbon coders. To meet traceability needs, they planned to replace the existing equipment, add time-code traceability, improve code quality, boost efficiency and reduce manual errors while matching on-site processes and installation conditions. Pain points The old ribbon coders could not print real time and did not support traceability; installation space was tight and the equipment could not protrude beyond the packer; ribbon marks rubbed off easily and looked poor; changing content meant replacing type, causing long stoppages, errors and no intelligent traceability. Customer needs and solution highlights Several packers in the workshop each run two film rolls independently; equipment runs continuously and intelligently, mounted inside without protruding; it must link with the packer and stop on fault signals; after-sales support must respond quickly. DIKAI coding solution: DLU520e UV lasers were selected — clean, dust-free, permanent and rub-resistant marks for anti-counterfeiting and anti-diversion; Two DLU520e units per machine run two lanes independently; a custom line-specific frame was built; a compact 70×70mm short-focal-length field lens was used, with the controller and water tank installed separately; the chiller was wall-mounted with about 6m of hose for a tidy workshop; The operation screen position was tuned for both marking visibility and ease of use. Project highlights: The compact DLU520e replaces the ribbon coder in the original space; marks are permanent with smart content changes, cutting costs and raising efficiency; chillers are wall-mounted centrally to fit the tight space and link with the production line.
Background The customer's ice cream line uses xxx nine-lane packers and needed thermal transfer overprinting (TTO) on the outer film. DIKAI delivered a centralized TTO solution. Customer needs The line has 12 lanes, with 9 ice-cream forming lanes to be fitted with TTO; parameters must be changeable centrally from a computer instead of adjusting each cabinet on site; the 9 TTO units must support one-key start/stop and batch printing-file updates; the software shows ribbon remaining, printing status and alarms in real time. DIKAI coding solution: TTO units were arranged across two packers — lanes 1–9 and 4–12 respectively; odd lanes use right-hand machines and even lanes use left-hand machines. An external computer centrally controls the 9 TTO units with custom management software. All 9 control boxes are integrated into one cabinet with 5m / 5m+3m cable routing; the encoder is mounted on the upper black roller to read the packer cut signal. Training notes Shift operators learn equipment operation and maintenance; in the software's [Printer Management], channel numbers match each device's network IP, and the configuration is production-ready once completed.
Background A veterinary pharmaceutical manufacturer has two production bases and started a line upgrade in 2025. Its premade-pouch line already runs DIKAI paging machines plus DLU500X lasers stably; the XX vertical film packers in three workshops previously used XX inkjet coders to print date and batch data. To improve code quality and reduce quality defects, the customer launched the film-line coding upgrade, and DIKAI provided an integrated coding + inline inspection solution. Pain points Heavy dust and sugary powder corrosion made the old equipment poorly suited and unstable over time; inkjet marks adhered weakly and rubbed off, hurting package consistency; consumables and spare parts were costly, after-sales response was slow and downtime risk was high; installation space was tight, requiring compact equipment. Customer needs Stable, compliant, zero-consumable green production; adapt to multiple film sizes with clear, rub-resistant, traceable marks; detect missed, blurred or wrong codes online and reject automatically via the packer; full automatic linkage of coding, inspection and packaging; fast after-sales support and long-term spare parts. DIKAI coding solution: A DLU500X UV laser plus Keyence IV4 vision inspection was deployed as one integrated quality loop; DLU500X is already proven at the site, fitted with a 70mm×70mm field lens and compact enough for embedded installation; the Keyence IV4 vision system has built-in AI learning, strong interference resistance and a small footprint; Custom brackets and control cabinets match the existing layout and minimize the impact of site changes on production. Project highlights DLU500X is proven in pharmaceutical and veterinary scenarios; combined with vision, it achieves 100% inline code inspection; coding, inspection and the packer are deeply linked for a fully automatic closed loop, reducing manual intervention and raising quality control.